Chrono-Regulator
Chrono-Regulator
Chrono-Regulator
Chrono-Regulator
Chrono-Regulator
Chrono-Regulator

Chrono-Regulator

5.990,00 €

incl. VAT, plus
68Limited editionOnly 68 pieces worldwide

The fascination of design and technology.

  • 2-year warranty & personal service
  • Certified manufacture quality from Germany
  • Free shipping within Germany
  • Secure worldwide shipping
Secure payment:
Questions about this watch?+49 6023 91993Mon – Fri, 9 am – 5 pm (CET)
Send a message

Production time: 10 Days

Technical Data

Movement
Caliber
31679.AS Hand-wound, fully skeletonized by hand, hand-engraved and finished, with blued screws, 23 jewels
Power Reserve
Approx. 42 hours (36 hours with stop function switched on)
Functions
Minutes, off-center hour at 6 o'clock, off-center second hand, off-center minute counter, stopwatch and totalizing function, date
Case43,5 mm · 5 atm
Case
Stainless steel case with glass back
Diameter
43.5 mm
Height
13.65 mm
Glass
Sapphire crystal on both sides, anti-reflective coating on the front
Water Resistance
5 atm
Dial & hands
Dial
Guilloché, champagne-colored, with open center
Hands
Blued stainless steel
Strap22 mm
Lugs
22 mm
Strap
Genuine Louisiana alligator leather strap with engraved solid stainless steel pin buckle
Edition68 Pieces
Reference Number
AS.CR02-2
Limitation
68 Pieces

Even at first glance, the new Chrono-Regulator-Skeleton fascinates with its design and technical innovations. This is proof that a Chrono-Regulator can be presented functionally and in terms of readability very well even as a “skeleton” version.

The chrono regulator is a rare version of the chronograph. The hour, minute and second indications are placed in three different locations: The minute comes from the center, the hour is located at 6 o’clock and the second is found at 9 o’clock. In addition, there is the stop function with two hands: the large second hand from the center and the small minute counter at 3 o’clock. Due to the blued hands and the clear time division, it is very easy to read the time.

Another feature is the rhodium-plated and skeletonized date display disc. In order to see the date clearly in one position, a special bridge with a window at 6 o’clock was developed. Below this window, on the movement’s plate, there is a circular area to which a thin layer of dark blue enamel has been applied to improve visibility. The movement of the timepiece is not only hand-skeletonized, it is also hand-engraved on both sides. The production of such watches is very laborious and is therefore strictly limited to 68 pieces per dial.

WIR EMPFEHLEN